UTCheats.net - Unreal Tournament & Tactical Ops cheats and hacks

================================================================================
  NEXGEN SERVER CONTROLLER VERSION 1.12N
  ZEROPOINT PRODUCTIONS, December 2011
  D.SCHEERENS@GMAIL.COM /  edited by Letylove49
================================================================================



================================================================================
  TABLE OF CONTENTS.
================================================================================
 1. INTRODUCTION.
 2. QUICK INSTALLATION GUIDE.
 3. UPGRADING FROM A PREVIOUS VERSION.
 4. NEXGEN VERSION HISTORY.



================================================================================
  1. INTRODUCTION.
================================================================================
Nexgen is mod for dedicated Unreal Tournament servers to facilitate server
administration tasks. Rather than having the execute console commands or edit
configuration files, Nexgen allows server administrators to change settings and
perform actions in game via an user friendly interface. Nexgen also provides
several useful features that are commonly desired, such as spawn protection,
message logging and a ban system. The complete feature set is quite extensive
and can best be studied by looking at all the available options in the Nexgen
control panel interface. Finally Nexgen has support for plugins so that extra
features can be added.



================================================================================
  2. QUICK INSTALLATION GUIDE.
================================================================================
 1. Make sure your server has been shut down.

 Warning :

  Make a copie of your Nexgen.ini because you must creat a new one for use this version because i
 have mad some changement on the rights.
 
 2. Lookup the admin password in your servers configuration file. You'll need it
    later to configure Nexgen.
 
 3. Copy the following files to the system folder of your UT server: NexgenCC.u
    and Nexgen112.u
 
 4. If your server is using redirect upload the NexgenCC.u.uz and Nexgen112.u.uz
    files to the redirect server.
 
 5. Open your servers configuration file and add the following server packages:
 
      ServerPackages=NexgenCC
      ServerPackages=Nexgen112N
 
    Also add the following server actor:
   
      ServerActors=Nexgen112N.NexgenActor
 
 6. Save the changes to the configuration file and start the server. Note that
    the server controller will install itself automatically, so there is no ini
    file included with the Nexgen distribution.
 
 7. Start unreal and visit your server. If the installation was successful,
    Nexgen should now be running on your server.
 
 8. Now would be a good time to configure Nexgen. To do this open the control
    panel (say !open) and select admin login from the Client->Home tab. In the
    window that appears, enter your server administrator password (see step 2),
    and click on login.
 
 9. Once your password has been accepted a window will appear that tells you
    that your rights have been updated. Click the reconnect button to return to
    the server. Now you will have full access to all the tabs of the control
    panel. To configure your server goto the server tab and customize the
    settings to your preferences.



================================================================================
  3. UPGRADING FROM A PREVIOUS VERSION.
================================================================================
 1. Make sure your server has been shut down.
 
 2. Delete Nexgen1xx.u (where xx is the previous version of Nexgen) from your
    servers system folder and upload Nexgen112M.u to the same folder.
 
 3. If your server is using redirect you may wish to delete Nexgen1xx.u.uz if it
    is no longer used by other servers. Also upload Nexgen112.u.uz to the
    redirect server.
 
 4. Open Nexgen.ini or your servers configuration file if the Nexgen settings
    are stored there.
 
 5. Do a search and replace where the string "Nexgen1xx." should be replaced
    with "Nexgen112M." (without the quotes). Again the xx denotes the previous
    version of Nexgen that was installed on your server.
 
 6. If you upgrade from version 1.08 and below change the following setting
    keys:
     
       configEncryptionKey=
       configCodeScheme=
   
    to:
   
       configEncryptionKeys[0]=
       configCodeSchemes[0]=
   
    This step is very important. If you forget to do so, all passwords on your
    server become unusable.
 
 7. If you have Nexgen.ini opened save the changes and close the file. Now open
    the servers configuration file.
 
 8. Goto the [Engine.GameEngine] section and edit the server package and
    server actor lines for Nexgen. They should look like this:
       
       ServerActors=Nexgen112N.NexgenActor
     
       ServerPackages=Nexgen112N
 
 9. Save changes to the servers configuration file and close it.
 
10. Restart your server.
 


================================================================================
  4. NEXGEN VERSION HISTORY.
================================================================================
Frensh :

Principales nouveaut馥s:
Version 112N  Version public.

Version 112M  (version priv・
correction Bug en mod tournoi avec UTPure lorsque l'admin force le jeu a demmarer sans
le nombre requis de joueurs. ( readyflag)

Version112L ( Recompil・pour compatibilit・avec NexgenPlus100L)

Version112K Version Public de Nexgen112J

Version112J ( version Priv・
Fix bug avec le kick for Match ( le joueur n'est plus banni forever a la fin du match)

Version112I (version Priv・
Time out 20 sec au lieu de 50

Version112H Version public de Nexgen112H

Version112G   ( Version priv・
le Admin message est de retour dans le pannel Moderateur.

Version112F ( Version Priv・
Le nom de l'admin qui a publier l' interdiction est visible pour les utilisateur Level7 ou RootAdmin
Les interdictions ne peuvent etre modifier que par l'admin qui l'as mise. ou etre modifier par un admin Level7 ou rout Admin
Kickmatch option  ( permet de kick un joueur jusqu' ・la fin du match
Dans la popup quand vous etes banni le nom de l'admin qui l'as publier sera afficher.
fonction AutoBan pour le WMessagehack ( pour plus d'info demander a Bob de DU)

un Grand Merci a Feralidragon du site Gopostal.com pour son aide pr馗ieuse.


Version112C
Onglet Chatlog pour voir ce que les joueurs disent.(plus besion d' ouvrir la console si vous manquer un message)
Hud  couleur modifer pour le text et le Playerlocation pour plus de lisibilit馥.
PlayerLocation = Cyan
Text = Vert

Version112B
Time out  50 sec au lien de 20
AccountType Max 30 au lieu de 10
Messages en Cyan au lieu de Orange.
Le Hud est maintenant compatible avec le setting de ut meme en MonsterHunt
Les message d' instruction du mod monsterhunt sont maintenant afficher normalement.



Engish

VersionN
Public Release of Nexgen112M

Version112M ( Private)
Fixed bug on tournamentmod with UTPure  when the game is forced to start by an admin without the nomber
required of players.(readyflags)
added : New Right : Limited administrator ( you will need to create a new Nexgen.ini because the privilege
has been changed .
512 slots for ban instead 128.

Version112L ( only recompiling for compatibility with
NexgenPlus100L) Version112K Public Relase of Nexgen112J

Version112J (Private)

Fix bug with the kick for Match (the player is not banned any more
forever has the end of the match)

Version112I (Private)
Times-out 20 dryness instead of 50

Version112H ( public RELEASE OF V 112G)


Version112G (Private)
the Administrator message is of return in the Moderator panel

Version112F (Private)

The name of the administrator who has to issued the Ban is available for the user Level7 or RootAdmin
Bans can be to modify only by the administrator who have issued it or being to modify by a Level7 administrator or root Administrator
Kickmatch option (allows to kick a player until the end of the match
In the popup when you are banned the name of the administrator who issued it will be display.
AutoBan function for WMessagehack (for more information to ask has Bob of)

A big thanks for Feralidragon of the Gopostal.com site for his assistance.

Version112C (Private)

Chatlog Pannnel to see what the players say. (more more required to open the console if
you to miss a message)

Hud color modifer for the text and Playerlocation for more readable.

PlayerName = Team color
PlayerLocation = Cyan
Text = Green

Version112B ( Private)
Times-out 50 dryness with the bond of 20
AccountType max 30 instead of 10
Messages in Cyan instead of Orange.
Hud is now compatible with the setting of ut same in MonsterHunt mod
The message of instruction of the MOD monsterhunt are now to normally
post.